Applying advanced technology for a new dimension in sports diving
The wing has been carefully designed to achieve perfect positioning in water with great comfort at the surface.
NX harness is easy to put on and take off without compromising stability, comfort and security.
Great flexibility, use your NX Series harness with doubles just by replacing the wing.
The gas position in the wing ensures minimal drag and no unwanted dead air spaces.
Double shell Cordura wing is extremely durable, perfect for wreck diving.
Not sure? Compare versions:
Jump on any dive boat in the last 20 years and every BCD you see will be a slight variation on a theme. The NX ZEN is the result of our passion to break from that tradition, from what works, into what performs at a previously unheard of level.
Deconstructing traditional designs, bringing XDEEP’s technical diving experience and expertise, led to a step change in BCD design and application.
The ZEN wing is deliberately narrow so that it does not protrude from the side of your tank. This brings advantages in enhancing your buoyancy control, in reducing any entanglement hazards and in significantly reducing drag. As we reduce drag we usually improve our gas consumption, enabling longer and safer dives.
ZEN wing provides 19kg of lift, while its size is comparable to classic wings with 17kg of lift.
The compact engineering of the NX series inflator has allowed a reduction in the required size of the upper part of the wing. This results in a position at the surface that lifts you high out of the water and ensures lift is in the right place when submarged.
Traditional inflation systems are mounted on the side, so that as gas is injected it can disturb trim if you are in a good flat position.
The compact nature of the NX series adapter allows it to be placed dead centre, eliminating unwanted gas movement. Air is added and is immediately distributed equally down both sides of the wing, leaving you in perfect trim.
ZEN, as with any other set from the NX Series is equipped with XDEEP’s perfect 3D Mesh lining.
This soft but non compressive pad adds to your comfort, whether in board shorts or drysuit. It helps prevent any small movement of the back plate against your back, adding to stability and security.
The 3D Mesh material does not need any additional lead due to the smart materials technology that allow easy water penetration and drainage.
The V-shaped crotch strap distributes load over a larger area, allowing you to sit comfortably into the crotch strap whilst at the surface.
The V is formed by two attachment points at the bottom of the back plate. This ensures there is an even tension preventing sideways slippage of the system and spreading the load for stability.
The NX Series V-strap is equipped with two Cargo D-Rings instead of the usual one. The design results in the D rings being set off to each side as opposed to a traditional centre ring, providing easier access to clipped off gear.
To truly be at one with your equipment, your weight system must be perfectly balanced, be secure and easy to configure and use. The modular weight system in the NX series means you can confine your weight belt to history.Tailor your weight distribution for the diving you are doing. From a couple of kilos needed in the warm sun, to the extra lead needed in cold water diving, you can select the pockets that best suit your needs.